Galvanic heaters
Immersion heating elements are used to heat technical baths.
e-mail: sinkoplex@sinkoplex.pl tel.: 62 591 30 11
Zapytaj o produkt
![]() |
![]() |
![]() |
![]() |
Food industry (molds) |
Chemical industry |
Footwear industry |
Furniture industry |
![]() |
![]() |
![]() |
|
Foundry industry |
Wood industry |
Automotive industry (injection molding machines, molds) |
-
- Power: 2,5 W/cm2*
- Voltage: according to customer guidelines*
- Operating temperature: 90oC*
- Diameter: 40-60 mm*
- Width: 382-5000 mm*
- Sheath material: AISI 304, AISI 316Ti, AISI 304 + Teflon, quartz glass*
- Cover box: PP plastic*
*The values (parameters) are examples and do not constitute an offer within the meaning of art. 66 of the Civil Code.
Each heater is designed individually.
![]() |
![]() |
![]() |
![]() |
Cutting of the pipe< |
Winding the heating spiral |
Making a power connection according
|
Welding the bottom |
![]() |
![]() |
||
Installation of the ceramic
|
Heater design |
Laying ceramic fittings and pulling the spiral |
-
- Quartz glass - chemically resistant to all solutions except hydrofluoric and fluoric acid and chromium baths. The quartz jacket can only be destroyed mechanically, not thermally. Quartz glass is resistant to so-called "thermal shock" (rapid temperature changes).
- Teflon - shows resistance to all types of baths. It is the only material suitable for fluoride chromium bath and hydrofluoric acid bath. Teflon coating is not resistant to mechanical damage, therefore even the slightest break in its integrity results in damage to the entire surface.
- Steel - stainless steel suitable for acid and alkaline baths. The steel grade depends on the type of bath (AISI 304, 316Ti). The steel coating is resistant to mechanical damage.
We make galvanic cartridges for heaters with diameters: 27, 32, 37, 40 and 45 mm.
In case of damage to the galvanic heater, it is possible to replace the cartridge itself, provided the coat has not been damaged.
A very important stage in the production of galvanic heaters and cartridges is the appropriate selection of the dead zone of the heater (the heating zone must not be above the bath mirror).
CONSTRUCTION
High-quality ceramics allow achieving high power and high temperatures on the surface of the heater. Appropriately dense winding of the resistance element ensures uniform temperature across the entire heater surface.
Threaded M5 or M6 ends
Type | Power
[W] |
Voltage
[V] |
L [mm] |
L2 [mm] |
Load
[kg] |
Sheath material |
Application |
GGSZ |
900 |
230 |
382 |
82 |
2,21 |
quartz or tempered glass |
Alkaline baths, in particular:
Max. bath temp.: 100oC (373K) |
GGS |
900 |
230 |
382 |
185 |
3,21 |
steal OH1 AISI 304 AISI 316L AISI 316Ti |
All acid baths, in particular:
|
GGST |
900 |
230 |
383 |
185 |
3,21 |
Teflon coated steel |
All acid baths including rinsing water contaminated with hydrofluoric acid |