The heater is the element responsible for heating the water in the washing machine to a set temperature. A characteristic symptom that testifies to its damage is inaccurate dressing of clothes caused by insufficient heating of water. However, it happens that the signs of wear are completely opposite. A burned-out heater can work too hard, causing clothing to shrink. However, before you decide to replace it, check if there is actually a breakdown. Perhaps the cause of the problems is a faulty temperature sensor or a faulty thermostat?
Identification of the heater: how to find and recognize the damaged part in the washing machine?
To determine whether there is damage to the heater, you do not need to use specialized tools. First of all, perform the disassembly of the heater from the washing machine. Typical symptoms of damage are visible to the naked eye. Depending on the nature of the breakdown, the heater may be covered with a black coating or a layer of hard water sediment. The causes of malfunctions can also be mechanical damage, such as cracks, deformation or holes. If there are no major signs of wear on the part, you can make a resistance with a meter. If the multimeter reading will show 0, you need to replace the part.
The heater in the washing machine — where is it? In most cases, the heater is located at the bottom of the washing machine, under the drum. Locating it does not cause problems, since the element is large and visible immediately after removing the case.
What will be needed to replace the heater in the washing machine?
Replacing the heater in the washing machine yourself is as possible as long as you have the right tools. Before starting work, prepare: screwdriver, socket wrench, heater and gaskets. Keep in mind that tubular heaters should have technical characteristics corresponding to the specifications of the original product.
Want to save on replacing the heater in other household appliances? Check it out: Replacing the heater in the dishwasher step by step.
The first step to replacing the heater in the washing machine
Before starting repair work, prepare the workplace. Disconnect the washing machine from the power supply and water supply. New or old washing machine? Replacing the heater in devices with a more or less advanced design does not require great skills, but it should be carried out in compliance with safety rules.
Assembling a new heater: how to properly mount a new part
If you want the installation of the heater in the washing machine to go without complications, follow a strictly defined sequence. Once you have prepared the workplace and disconnected the device, do the following:
- Unscrew the back cover of the washing machine (after removing the screws, release the latches and remove the housing).
- Disconnect the connection wires of the heater and the temperature sensor.
- Unscrew the mounting bolts of the heater holder and remove it.
- Remove the old heater.
- Put on a new heater and tighten the nuts.
- Put on the heater handle.
- Connect the connection wires.
- Install the back cover.
As you can see, connecting the heater in the washing machine is completely intuitive. However, this is not all you should know about replacing this item.
How to replace the heater in the washing machine
People who do not have experience in service work can forget about a very important step - to take a picture of the connecting wires. Memory can be unreliable, and even the slightest mistake when reinstalling wires can cost you dearly. If you still do not know how to replace the heater in the washing machine, or you are afraid that you do not have sufficient skills to carry out this procedure, use the help of professionals.
Check it out: Replacing the heater in the oven step by step.
Professional advice: What to do if repairing the heater turned out to be difficult
How much does it cost to replace the heater in the washing machine? The price of such a service varies in the range from 50 to 200 PLN. Is it worth it to entrust this work to professionals? Of course it is! If you do not feel strong, it is not worth taking risks - especially since in case of damage to other components, the cost of repair will increase significantly.
Also read:
Replacing the heater in the boiler step by step
Evaporation of the heater - how to clean the heater in an e-cigarette?
Selection of a heater for photovoltaic panels. What to look out for?
Selection and installation of the heater for the radiator step by step
How to install heaters for a CO furnace? Step-by-step instruction
Check out our range of heaters
Pizza Oven HeatersHeaters for the ovenKettle heatersElectric Grill HeatersFryer heatersDistiller heatersHeaters for washing machineHeaters for dishwashers